Secure to Wall

Secure to Wall

Use the included wall template to position and mount the Redcat Access.


Mounting Steps:

  1. Position template at selected located and tape to wall.
  2. Mark position and drill pilot holes for anchors.
  3. Insert Anchors (Lightspeed provides anchors for drywall applications only)
  4. Remove feet from Redcat Access and place over anchors.
  5. Insert screws through the Redcat Access feet and tighten into the anchors.
  6. Slide the Redcat Access (top down) onto the wall mounted feet. If the security bracket is installed, it should snap intp place preventing system removal.

Note: If using optional security bracket, mount on wall using same method as decribed above for mounting feet